Specifications interior PVC doors
The plastic interior PVC doors are made of the hard PVC plate (productions of the German company SIMONA), which is glued on the wooden framework on both sides of it, in which there is an extruded foam polystyrene plastics, the edge of the door is trimmed with PVC lining, thickness of door plate is 42 mm, which increases durability, level of heat-insulation and sound protection; whereupon a door lock is inserted, then handles (very vast choice) and cylinder with three keys are assembled (there is a possibility to assemble a latch keeper lock for a water closet), then the curtains are fixed, the patterned glass is assembled on both sides (effect of glazing unit), at the bottom of plate there is a possibility to make a ventilation device (recommended for water closets), a door box by width of 8-10 cm made of wood covered by laminate decorative coating of PVC, a double fourth with strengthening is used on door plate and on door box, which protects from cold air, noise, moisture and improves a tightening and low noise of closing. And after that the lining is fixed which covers a joint between a door box and a wall. Plastic doors in the process of exploitation showed themselves better when installed in apartments with high humidity of air in saunas, semi-basements, garages, production and subsidiary apartments, water closets, and in other places with different values of temperature on the different sides of door, hot workshops, kitchens, vegetable stores; plastic doors are especially irreplaceable at the enterprises of food retail and pharmaceutical industry, medical establishments, sanatoriums, pharmacies, hospitals, pharmaceutical productions, preschool and other apartments with high sterility demands, where the presence of bacteria and microorganisms, with the proper care, is eliminated completely.
The plastic PVC doors by an order are made fully ready for installation, that means that the door box is already set in the fixed position, curtains are exactly driven in, locks and other parts are fixed in with use of special equipment. There is no necessity to fix and adjust the spare parts.
The complete set of internal plastic doors incudes:
- Door plate.
- Completed door box (width 8 or 10 cm)
- Parts - handles (at choice), latch (at choice). Lock PZ/WC (at choice).
- Inserted ventilation (at a necessity)
- Seals
- Bolt managed curtains OTLAW (Italy)
- Threshold (at a necessity)
- Doors are made according to your sizes
The Interior plastic doors are made under an order in different sizes, a one folding, one and a half folding or two folding constructions are used for this purpose:
Maximal sizes Maximal sizes Maximal sizes
of «one fold» doors with of «one and half» doors of «double fold» doors
a door box – 2120x930 mm. with a door box – 2120x1330 mm. with a box – 2120x1780 mm.
Minimum limit sizes:
Interior PVC doors in relation to the class distributing can be of the followings colors:
Standard class – a white color RAL 9016
Elite class – a golden oak color RAL 2178001;
Econom class - a grey color
|